Türkçe için Tıklayın.



Fluxer NT

A concrete admixture polycarboxylic ether based, with water reducing effect in high ratio / hyper plasticizer effect.

Definition:

Fluxer NT SERIES is a polycarboxylic ether based concrete admixture/additive with water reducing & hyper plasticizer effect, which increases premature and final strength of concrete by adding reoplastic characteristics to the concrete.

Application Fields:

In production of ready-mixed concrete without pump,

In production of precast and prefabricated concrete.

Advantages:

Compared to conventional super plasticizers (NSF or MSF), this method increases premature-final strength and tensile strength, adherence to steel, and impermeability of the produced concrete.

Improves mechanical characteristics such as carbonation, resistance against chlorine ion attack, endurance against aggressive chemicals, shrinkage and yielding.

A reoplastic concrete having low water/cement ratio, low segregation and desorption risks is obtained.

Ensures production of concrete with high premature strength even under low temperatures.

Minimizes formwork removal time.

Increases wear resistance of concrete by reducing segregation and bleeding.

Thanks to low water/cement rate, high premature strength and reduced bleeding in concrete mixtures, it also reduces time required to apply resin-based flooring systems onto fresh concrete.

Increases resistance against Congealment-Decomposition cycle of concrete.

Reduces cure time and temperature in precast element production.

Works in conformity with all cement types.

Reduced sensitivity against material differentiation.

FLUXER NT SERIES does not include chlorine.

Application Method

Binding element (cement-micro, silica-volatile ash-cinder) and aggregate should be mixed till a homogeneous mixture is obtained. After 50-70% of water amount that should be added to the mixture is added, FLUXER NT SERIES should be added to the mixture together with the remaining water. In order to achieve a homogeneous dispersion of FLUXER NT SERIES in the mixture, it should me mixed approximately 60 seconds or during time experienced as a result of laboratory experiences/tests.

Dosage

FLUXER NT SERIES should be used in 0,6 - 2 kg amounts for each 100 kg of binding element (cement-micro, silica-volatile ash-cinder). Usage dosage should be determined in accordance with concrete class and characteristics, and also laboratory tests to be performed beforehand.

Package

Bins of 30 kg

Drums of 230 kg

Tanks of 1000 kg

In bulk


© 2011 ACN Kimya Co.